Description
Tri M Strip ® is a non-woven fabric adhesive wound dressing with an absorbent pad that does not stick to the wound.
- Product designed according to British pharmacopeia 1988
- Tri M strip® packaging in printed medical paper one side and transparent plastic film from other side sealed from four sides.
- Shelf life is Five years according to our stability tests study (Validation of packaging material)
Application/Indication
Tri M strip® is suitable for the sterile post-operative care of slightly secreting wounds and as a wound covering after surgical procedures and injuries.
Presentations
Tri M Strip® sterile, individually sealed
Product Code | Size (cm) | Pieces / box | Boxes /case |
31 | 6 X 8 | 100 | 16 |
32 | 10 X 12 | 25 | 20 |
33 | 10 X 18 | 25 | 18 |
34 | 10 X 25 | 25 | 18 |
35 | 10 X 35 | 25 | 18 |
Benefits
- Highly absorbent and low adherent pad, the polyester wound contact layer enables the exudates to be absorbed through highly absorbent pad.
- Adhesive non-woven fabric is perforated and elastic in three way direction which means good aeration and high elasticity making it valuable to prevent skin maceration and ensure patient comfort ability.
- Safe and secure fixation a low allergy acrylic adhesive over non-woven fabric providing a safe and secure dressing fixation over the wound site.
- Usually apply above clean and dry skin free from soap or cream.
- Avoid use of antiseptic material which leave a greasy film in that case use a suitable disinfection, rinse and dry skin again.
- To ensure a perfect adhesive smooth out firmly from the center to the edger.
- Make sure that the elasticity of product follows the since of body movement.
- During withdrawing of plaster, slowly pull off in the non-elastic direction of plaster hair direction.
Instructions for use
- Clean the wounds by normal nurse care; dry the skin around wound using a sterile compress and apply the suitable size from surgical patch, Leaving 2 or 3 cm margin covering healthy skin.
- avoid use of antiseptic material which leave a greasy film in that case use a suitable disinfection , rinse and dry skin again
- To ensure a perfect adhesive smooth out firmly from the center to the edges.
- make sure that the elasticity of product follow the sense of body movement
- Content is sterile unless opened it or damaged.
- Use 70% alc. Spry to ensure easy removal of adhesive tape.
Composition/Material
- Adhesive plaster from spun lanced non-woven fabric covered by hot melt adhesive
- Non adherent absorbent pad from viscose covered by perforated polyethylene layer
- Silicon paper laminated